My first Optical Organ, described in the following page, has a problem that it makes annoying click noises at key on/off.
https://gaje.jp/projects/synth_effect/optical_organ_e/
I’ve analyzed the issue, and identified that switches to turn sound on/off has the problem.
Here is the schematic of the switch I currently use. The organ has this switch with every key. The circuit is very simple. The switch is in between an optical sensor that constantly generates sound signal and the output summing amp. This switch has a problem in connecting/disconnecting sound signal. Analog switch has very steep onset/offset characteristics, so the waveform at key on is too steep. It makes click noises. We cannot avoid it even if we carefully cancel the DC offset since the switch shapes the input signal itself.
In the next version of the optical organ, this is a point that needs improvement.
The circuit above gives the best result so far. This is a traditional semiconductor switch for gating sound signal, used by many effectors.
Hi, I am trying to convert a USB MIDI out from a keyboard to a LEGACY MIDI OUT/INK pair so I avoid going into a computer to generate sounds have potential driver drop outs.
How do I build this?
http://www.youtube.com/watch?v=nrXZQ7E2FEI
Please help if you can, it would help hugely..
Thank you,
Scott
Secondly,
do you have an optical switch for a DIY keyboard that can accomodate velocity sensitivity?
or even an optical switch for a DIY keyboard that is simply on/off?
Many thanks,
Scott
Hi Scott,
Sorry my USB-Legacy MIDI converter is using a PC. As you might know, you need a USB host to use a USB MIDI device. PC is a USB host, of course. If you want to bypass PC, how about using Arduino USB host shield?
http://www.sparkfun.com/products/9947
If you don’t mind buying it, Kenton has such a product.
http://www.kentonuk.com/products/items/utilities/usb-host.shtml
About optical switch, no, I haven’t tried it.